Thread: PWM out ports confused
View Single Post
  #7   Spotlight this post!  
Unread 24-01-2012, 15:27
codes02 codes02 is offline
Randolph aka Roxbury aka R_______
AKA: Cody Schafer
no team (Formerly: Team 11, MORT)
  
Join Date: Oct 2007
Rookie Year: 2008
Location: MA, USA
Posts: 57
codes02 is on a distinguished road
Re: PWM out ports confused
We (as a rookie team) ran into the cable issues (not sure that is your problem, but could be). We had flipped 1 end (to fix the KOP packing mistake which is mentioned in the Team Updates), but hadn't managed to press the connection all the way on. As a result, the pwms never seemed to output anything.

Key thing to look for is the little led next to the "RSL" connector. If the cable is working, it should flash continuously once the cRIO is started up.