Thread: Bumper question
View Single Post
  #89   Spotlight this post!  
Unread 25-01-2012, 16:10
Ed Law's Avatar
Ed Law Ed Law is offline
Registered User
no team (formerly with 2834)
 
Join Date: Apr 2008
Rookie Year: 2009
Location: Foster City, CA, USA
Posts: 752
Ed Law has a reputation beyond reputeEd Law has a reputation beyond reputeEd Law has a reputation beyond reputeEd Law has a reputation beyond reputeEd Law has a reputation beyond reputeEd Law has a reputation beyond reputeEd Law has a reputation beyond reputeEd Law has a reputation beyond reputeEd Law has a reputation beyond reputeEd Law has a reputation beyond reputeEd Law has a reputation beyond repute
Re: Bumper question

There is a question on FIRST Q&A with an inadequate answer from FIRST.

Q. We are deciding to use a square U frame. So, we have to split the 4th bumper into 2 sections. Because of this, we can't decide how to place "3490" on our Bumper. Should we place the 4 numbers on 1 side, or should we split 34 and 90 across the Bumper. R35 doesn't explain how to handle this situation.

A. Per [R35] team numbers must be "clearly visible from a distance of not less than 100 ft, so that judges, referees, and announcers can easily identify competing Robots." Thus they may not be obscured in any way (disconnected, out of order, rotated, upside-down, mirror imaged, etc).


We are a 4 digit number team and we have a short front bumper on the left and one on the right (many teams do this year). I understand each short bumper must be at least 8 inches long. With the [R35] requirement

Teams shall display their team number on the Bumpers in four locations at approximately 90° intervals around the perimeter of the Robot. The numerals must be at least 4 in. high, at least ¾ in. in stroke width, and be either white in color or outlined in white. Team numbers must be clearly visible from a distance of not less than 100 ft, so that judges, referees, and announcers can easily identify competing Robots.

Each letter will be at least two inches wide. How can I fit 4 numbers in an 8 inches width? If I don't leave any space between them, it will not be very readable. Any ideas?
__________________
Please don't call me Mr. Ed, I am not a talking horse.
Reply With Quote