Quote:
Originally Posted by otherguy
Just so you know... If a jaguar in a daisy chain fails, down stream jags are NOT affected. The contacts on the PCB are wired through (in to out) without going through active components.
|
Yes, that's true. I realize my mistake after I post. That's why in my subsequent post I said the following instead.
Quote:
|
So there is no issue of daisy chaining where one segment has problem and all down stream Jags are disabled.
|
If you make your own CAN bus cable, which I do, you may have cable problem or connector problems that would affect down stream Jaguars.