|
Re: Trouble reading Kinect values from robot
Okay, FIRST thinks that the issue is due to a conflict with the missing Cypress IO board.
Here are some temporary solutions to try.
Please, report back if this helps or fails. - See if plugging your Cypress board USB in makes it all better.
or - Go to the Driver Station I/O tab, click Configure and change it to Compatible mode to see if that makes the Kinect data work.
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 26-01-2012 at 18:37.
|