|
Re: Gearbox options for Fisher Price
I'm no expert on this subject, but let me throw a couple thoughts out there and I know the CD community will help refine them for us.
It appears that the pinion and 1st stage gear in the FP trans are 32DP. I base this on this pinion at AndyMark.
From what I remember, and here is where I may need some help, most of the stages of the FP trans use the same DP gears. So using the equation for determining the center to center distance for gears, CtoC= (N1+N2)/DP, where N= number of teeth on the gear, you should be able to build your own transmission quite easily.
For each gear interface, adding .003" is a good idea to account for manufacturing tolerances.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|