Quote:
Originally Posted by Tuba4
This would clearly violate the following:
[G21] Robots may extend one appendage up to 14 in. beyond a single edge of their frame perimeter at any time.
No need to discuss continuity here. One edge at a time!!!!!
|
While this rule may well be intended to mean "beyond
ONLY a
MAXIMUM of ONE SINGLE EDGE," it is not really worded to accomplish this.
Plus, it should have added ==> "and may NOT extend ANY AMOUNT beyond ANY OTHER EDGES of the robot." -- if this was what they really meant.
Consider this example: Let's suppose I tell you to deploy an appendage diagonally at 45 degrees off the corner of our bot for 14" of extension, and the robot is a rectangle.
I then tell you to check whether this arm extends more than 14" beyond any
single edge of the robot.
You then report back to me that compared to NO SINGLE EDGE does the robot arm extend more then 14". You verified this by holding up a long straight edge spaced 14" away from each side,
one at a time, to confirm this.
This rule's wording can also simply mean that you are comparing the tip of the arm's position to EACH INDIVIDUAL FRAME EDGE LINE ==> ONE LINE AT A TIME. So even though the appendage clearly extends beyond two of the four edges, it does NOT extend beyond 14" for "any single edge " measured ALONE.
BTW, if a circular robot is allowed, does it only have one edge? If so could it deploy a skirt outward, all the way around the robot for up to 14" as long as the skirt formed a "contiguous" loop?
There does seem to be a distinct bias toward rectilinear design concepts with the structure of the FIRST game rules.
-RRLedford