Quote:
Originally Posted by Mark McLeod
Okay, FIRST thinks that the issue seems to be due to a conflict with the missing Cypress IO board.
Here are some temporary solutions to try.
Please, report back if this helps or fails. - See if plugging your Cypress board USB in makes it all better.
or - Go to the Driver station I/O tab, click Configure and change it to Compatible mode to see if that makes the Kinect data work.
|
I set the DS I/O tab to Configure and it didn't work. Then I installed the update that came out a few days ago (found it on the Team Updates section on usfirst.org), and suddenly the robot started recognizing the Kinect! Thanks for the help, though!