Quote:
Originally Posted by neal
So the frame has to be 8 inches?
Would we have to change both of those 6 inches to 8 inches? If so, that would kinda suck - we'd only have about 11 inches of opening.
|
Yes. Welcome to FRC.
Quote:
Originally Posted by SuperNerd256
Does it mean 8 inches for each side of the robot combined, or 8 inches on the robot in a row?
|
Each vertex has two sides, for a total of eight sides. Each of these eight sides MUST have not less than 8" of bumper, backed by "something substantial".
The least amount of bumper you can get away with is eight 8" long pieces.