Quote:
Originally Posted by SoloRacr
I've ordered several banebots RS-550-B motors which have a 3/8" encoder backshaft. This will be coupled to a P60 gearbox.
The motor shaft is 3.2mm according to banebots.com
I haven't been able to locate an appropriate encoder that would plug n' play on the back of this motor. Banebots do not seem to offer one.
Is there a US Digital E4 available for this application?
Any links, p/n's or information would be greatly greatly appreciated. Point me in the right direction and I can do the rest in terms of research, datasheets etc.
|
There is an E4P with a 1/8 shaft (3.175mm) which might work. Next largest is 5/32.
Quote:
Originally Posted by Alan Anderson
According to the US Digital E4P web page, the largest shaft they accommodate is 1/4 inch.
|
The 3.2 mm shaft is extended out the back. The length of the shaft is 3/8".