Thread: FIRST Team 101 Driving over the bump
View Single Post
  #7   Spotlight this post!  
Unread 31-01-2012, 14:15
striker's Avatar
striker striker is offline
Registered User
AKA: Michael Walsh
FRC #0101 (STRIKER)
Team Role: Mentor
  
Join Date: Jan 2012
Rookie Year: 2002
Location: United States
Posts: 15
striker is an unknown quantity at this point
Re: FIRST Team 101 Driving over the bump
Quote:
Originally Posted by AcesJames View Post
Looks (to me) as though the front open end of the robot is having some frame flex issues. The inside corners (ball intake opening?) seem to be angled down in relation to the outside corners on the front 2 edges of the chassis.

Do you have any plans to tie the frame together to prevent flex? If you don't, I suggest you look into it. A lot of frame flex will cause your axles to be out of alignment, which will also throw off where your wheels sit in the chassis, and can potentially cause driving issues and loosen chains.
The front open end is already stabilized. We noticed that right away too.
Last edited by striker : 31-01-2012 at 14:18.