Quote:
Originally Posted by HoneyBadger4260
Try flipping the three colored wire around. We moved ours from the table top to the robot and one of them got flipped around. Only took us an hour to figure it out  We are rookies so that is all we have for you. Good Luck |
First, you have to make sure the PWM wires (A PWM wire is a red wire, black wire, and white wire held together by an adapter at each end) are connected to the Jaguars!
That's where a PWM wire is supposed to be connected to on each Jaguar. If there isn't one there, there needs to be one connected to each Jaguar and a corresponding port on the Digital Sidecar. If there's one already there, follow HoneyBadger4260's advice.
I hope this helps and good luck!