Quote:
Originally Posted by huberje
First, you have to make sure the PWM wires (A PWM wire is a red wire, black wire, and white wire held together by an adapter at each end) are connected to the Jaguars!
That's where a PWM wire is supposed to be connected to on each Jaguar. If there isn't one there, there needs to be one connected to each Jaguar and a corresponding port on the Digital Sidecar. If there's one already there, follow HoneyBadger4260's advice.
I hope this helps and good luck! |
our PWM cable is orange, red and brown, I believe. unless that's a different cable entirely. but that is whats hooked up from the sidecar to the jaguar. and weve tried honeybadger4360's advice. nothing happened. Do we have the wrong cable or something?