Quote:
Originally Posted by Bob Steele
We are working on a solution too. Think about "leading" with the contiguous element... perhaps a linkage that moves the appendage out and then down..
Or use two separate controlled motions to move the appendage out and then swing down...
I hope this helps some...
Good luck
|
Thank you for your support. Yeah we will probably start looking at some type of drawer slider method instead of a rotational method. That way some decorational piece of .0625 flat bar can be at the end of the sweeping appendage.
I also agree with you that we appear to have blocked the GDC into a corner but it seemed necessary to keep all the inspections and ref calls equal across the whole season. I would hate for week 1 to be judge differently than week 6.
I am glad we got a finite ruling now so we can finish our design. It shouldn't be too hard to come up with something