http://imgur.com/pHaX7 --- Teleop.vi
http://imgur.com/hic4V --- Begin.vi
http://imgur.com/mE9fR --- Finish.vi
As you can see, I removed the original code, and then added in my OWN code.
I can successfully deploy the robot code to the cRIO.
Then, I switch over to the Classmate and I get Robot Communication and Code.
However, when we move the joystick on our controller, motors 3 and 4 DO NOT respond with the code. There is no signal being sent to either Jaguar.
Please help. If you know what the problem is, please tell. We are desperate right now. It's not our hardware or wiring. The only solution I can think of is the programming itself. So please explain what my problem is.