|
Unknown NI 9102
My team and I were just finishing up our bot after some re-modifications and I put in the code for testing. Whenever I tried to run the bot, it ended up not moving and the jaguars continued to blink as if they weren't receiving any information from the cRIO. I re-uploaded the code a few more times and concluded there was nothing wrong with the code and the electronics all seemed to be fine. My team and I decided to just re-image the cRIO in case anything had gone wrong, but when I opened the application, the module diagram showed that the NI 9102 module was unknown. It was in the first slot, was properly connected in, had a green light on showing it was receiving power, but it wasn't working. I took it out, put it back in, and re-imaged the cRIO, although, nothing has helped it. We're excited to almost have the bot done, but it just won't run so any help would be appreciated. Thanks!
|