|
Re: No Status LED on Jaguar
Opening the Jag may affect the warranty. Check with TI first. It sounds like one of the internal regulators may have taken a hike. If you are sure you are measuring 12 volts at the input terminals, that is about all it can be. I ask about both terminals because it is possible to measure to one terminal while connected to battery common on the PD and still read +12 volts while having an open wire and no power to the Jag.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
|