|
Re: Bumpers and Team Number
The minimum length of the bumper is 8 inches along the frame. Add in the thickness of the plywood and noodle, and you'll have 11.25 inches from the outside corner to the inside edge of the bumper.
The digits need to be 4 inches high, and 3/4 inch stroke width. There is no specification on the digit width, except that it must be clearly legible. So pick a simple font, don't put too much space in between digits, and it should fit. Our team is a 3-digit number, so we have room to spare. 4-digit teams will probably need to use almost all available space.
__________________
Cal
R3: Red Raider Robotics (FRC Team 578)
Fairport, NY, USA
www.FairportRobotics.org
2016 Finger Lakes Regional: Semifinalist on Alliance 7 (1128, 2010, 578)
2016 NYC Regional: Finalist on Alliance 3 (3419, 578, 3017), 4th seed team, Team Spirit Award
2015 Finger Lakes Regional: 8-3-0 in qualification, 7th seed, Quarterfinalist
2014 NY Tech Valley Regional: 8-4-0 in qualification, 13th seed, Semifinalist
2013 Finger Lakes Regional: 4-5-0 in qualification, 26th seed, Alliance 6, 1-2 in tournament
2012 Buckeye Regional: Gracious Professionalism Award, 7-3-0, 14th seed
2011 Finger Lakes Regional: Engineering Inspiration Award
Last edited by Cal578 : 08-02-2012 at 13:18.
Reason: fixed typo
|