Quote:
Originally Posted by kalosmail
Additional information... the jaguars keep blinking yellow... they never go into a solid yellow led. We are working on the remote mode, if we go to automatic there is an error on the message window "Error 44061"...
|
Post the entire error log here. It sounds like either a Motor Reference issue (the speed controllers will blink if there weren't created correctly in the Begin.vi) or a Camera issue (if the camera isn't connected and/or isn't communicating to the cRIO it will error out repeatedly and can cause this kind of behaviour, unless you have ALL the camera code disabled or removed).
My bet is that the camera is indeed hooked up but was reset accidentally (by something pressing the reset button) or it was configured but lost it's configuration due do the last version of the Camera Config Tool which would make it factory reset on a power cycle. If you do have a camera and the light is green this is not a problem. You should also be able to ping the camera at 10.xx.yy.11