11-02-2012, 19:41
|
|
Passionate FIRST-er, CD donor
AKA: Gerry
 FRC #0578 (Red Raider Robotics) Team Role: Mentor
|
|
Join Date: Jan 2012
Rookie Year: 2008
Location: Rochester, NY
Posts: 256
|
|
|
Re: Bumper/frame question
Quote:
Originally Posted by BJT
...there needs to be a minimum of 16 inches of frame covered by bumper on each side...
|
If you wanted to make a very small robot, with one side <16 inches, it would be legal, as long as it's at least 8 inches, and no breaks in between the corners. Each vertex would still have the minimum 8".
__________________
Cal
R3: Red Raider Robotics (FRC Team 578)
Fairport, NY, USA
www.FairportRobotics.org
2016 Finger Lakes Regional: Semifinalist on Alliance 7 (1128, 2010, 578)
2016 NYC Regional: Finalist on Alliance 3 (3419, 578, 3017), 4th seed team, Team Spirit Award
2015 Finger Lakes Regional: 8-3-0 in qualification, 7th seed, Quarterfinalist
2014 NY Tech Valley Regional: 8-4-0 in qualification, 13th seed, Semifinalist
2013 Finger Lakes Regional: 4-5-0 in qualification, 26th seed, Alliance 6, 1-2 in tournament
2012 Buckeye Regional: Gracious Professionalism Award, 7-3-0, 14th seed
2011 Finger Lakes Regional: Engineering Inspiration Award
|