[Swampdude]

"All portions of an appendage that are outside the Frame Perimeter must be contiguous with each other. Very brief violations of the contiguity requirement as a single appendage is being extended or retracted will not be penalized."

I would qualify our appendage as being extended or retracted "briefly" between the points where only the rollers are on the leading edge. As you can see there's a very small distance before the ramp is outside the frame perimiter and then qualifies as a contiguous member of the appendage. So as the ramp traverses up and down there are brief violations that "will not be penalized".

But thanks for the heads up.

Now to get the camera working and tweak the shooter...