|
Re: cRIO Imaging Failure
Did you: - Connect your programming laptop to the DLink, then the DLink to the cRIO
- Disable all other NICs (don't just turn off wireless, actually go in and Disable it), so only the Ethernet port connected to the DLink is enabled.
- Let the Driver Station application set your programming laptop's IP address (it'll do the right thing)
- Keep your Firewalls and anti-virus turned off
I suppose there's the possibility of a corrupted installation.
Have you tried from a different computer?
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 12-02-2012 at 15:21.
|