Thanks guys. We have two spikes, one designated for the compressor and one designated for whatever we needed one for (we thought we read somewhere that we needed a spike for the solenoid). That was a smart choice to make today
So Compressor is wired to the sidecar in it's respective slot.
Then the 24V Solenoid is wired straight to the breakout on the cRIO
Then the 12 V is run through a Spike and then the pwm cable goes where? Does it go to the Breakout too? I assume somebody on my team knows this, but having confirmation from veterans for rookies is always nice.
Thanks again,
Snowbird
Team #4265