Quote:
Originally Posted by Mark McLeod
The motor Refnum Get isn't a Refnum Get in teleop.
It's a Set instead, so that needs to be changed to a Get.
|
I fixed this in our programming, however the jaguar that has code for button-action is ddisplaying a constant blinking yellow still when the robot enables.
I do not believe that the jaguar should be blinking yellow when the robot is enabled. No code was changed except for the Set to a Get in Teleop. Please anyone if you can help, do so ASAP
Could it be we're missing something with the cRIO cards? We have NI 9403 in slot 2 on our 8-slot cRIO (So it IS the Digital Module 1)