Quote:
Originally Posted by Team3763 Adam
...for some reason, PWM 5 isn't working.
|
Your Begin looks like it's opening the motor correctly, so the speed controller's LED should stop blinking when the robot is enabled. If it doesn't, there's mostly likely a wiring problem (or a broken component). But make sure you aren't still getting any errors on the Diagnostics tab of the Driver Station.
Try swapping the PWM cables between one of the Jaguars that works and the one that doesn't. If the problem follows the cable, focus on the Digital Sidecar connection. If the problem stays with the Jaguar, mark it as suspect and replace it.