Quote:
Originally Posted by Greg McKaskle
There should be no problem connecting to the robot from other IP addresses such as 15. Development computers that also run the DS do this all the time. I'm a little less certain about the official field FMS. Is there a reason you aren't using 10.te.am.05? That is reserved for the DS and is probably what the field routers add to the VLAN. I'd move it to .5 to be safe.
Greg McKaskle
|
Actually, 'Getting Started with the 2012 Control System' States:
Quote:
When connecting a computer to the DAP-1522 via Wi-Fi, ensure the computer’s network settings match the following:
IP address = 10.xx.yy.zz
o xxyy is the team number (do not enter leading zeros).
o zz is any number greater than 10 and less than 255.
|
So that's why i use .15