|
Re: Welding Right Angles
If you're welding a shaft onto a plate (what it sounds like) I would do 4-6 tack welds, then seam between the tacks in an alternating pattern like tightening down lug nuts. Ensure there is solid fit between the two pieces with little or no gaps. Gaps are a huge contributor to weld warping.
__________________
Theory is a nice place, I'd like to go there one day, I hear everything works there.
Maturity is knowing you were an idiot, common sense is trying to not be an idiot, wisdom is knowing that you will still be an idiot.
|