Quote:
Originally Posted by bfk
I know we're not using DHCP, and we are setting a static IP address in the Windows 7 approved manner. Sometimes the address changes from 10.25.21.5 to 10.25.21.9 for no apparent reason.
|
Now we're getting somewhere. The Driver Station software sets the wired interface to 10.xx.yy.5 and the wireless to 10.xx.yy.9
I'm now a little confused by "Needless to say this causes a total lack of communication with the robot, which is always bad news." Both of those addresses should communicate with the robot just fine.