The rules give a pretty detailed description:
Quote:
[R57]
Robots shall use the diagnostic Robot Signal Light (RSL) provided in the KOP. It must be mounted on the Robot such that it is easily visible while standing three feet in front of the Robot.
The RSL must be connected to the “RSL” supply terminals on a Digital Sidecar
See the 2012 Robot Data Diagram on the KOP website and the item bulletin online here for connection details.
The Digitial Sidecar must be connected to a NI 9403 module in Slot 2 of the cRIO.
The RSL must be wired for “solid light” operation, by placing a jumper between the La and Lb terminals on the light per Figure 4‑9.
Figure 4-9 http://frc-manual.usfirst.org/upload/4.1.9-1.jpg
|
You can look at [R44] and [R45] for the appropriate wire gauges and colors.
-Luke