|
Re: banebot smoke
The quickest way to generate heat on those motors is to run them at a stall. Are you using the motors to hold an arm steady while a force is applied? If so, you are stalling the motors.
If your motors are spinning and are still melting, I would guess air flow would be your issue. Hope this helps!
__________________
'03 - FRC 365 - Driver
'04 - FRC 1370 - Mentor
'05 - FRC 1493 - Mentor
'09-'11 - FRC 2975 - Mentor
'12-'13 - FRC 4029 - Mentor
'15 - FRC 1319 - Mentor
'07-'10 - Judge
|