|
Re: 3481 Bronc Botz GOING "Battle Botz"
Quote:
Originally Posted by thefro526
Really loving this chassis, it looks a bit like ours but better.
How do you like the Colsons? Look like the hot wheel of 2012. (Even though teams in NE have been using them forever)
|
THANKS, Dustin!
The Colson's are great... a lot to set up though... we had to lathe a nylon insert that was also broached to hex... and then the slightly-larger insert had to be pressed into the wheel hole... AFTER this was done with an Arbor Press... we invested in a 20-ton Shop Press for such future endeavors as well as present ones!
Our default is to first use IFI/VEX Pro products as a solution, including wheels/riveted-tread... but, we determined the metal rims were just not right to get over the center-barrier. AND the friction coefficient of the Colson's is great... so, we are able to _push-back_ with authority in low-gear using 4 CIMS 6-wheel drive.
--Michael
__________________
"Retired Insurance Guy"
Link to me on this new fangled-thingy called The Linkedin and help make me popular, or at least appear to be... ;-)
https://www.linkedin.com/in/wmichael...ve_tab_profile
- Head Coach / Founder - FRC 6370 Texas Titans < FRC and VEX teams under development - VRC 15842a >
- President / Founder - San Antonio Competition Robotics Alliance - SACRA 501(c)(3) nonprofit (2012-present)
- Executive Director - Sports-Competition Robotics of Texas Excellence - SCRATE (2016-present)
- Former-Head Coach / Founder - FRC 3481 - Bronc Botz (2011-2016) // C++ Beta Test Team (2012 to 2016)
- Former-Lead Coach (2013-2016) Former-Head Coach (2009-2012) / Co-Founder - FTC 4008 - Bronc Botz (2009-2016) and FTC 4602 - Bronc Botz (2011-2016) and FTC 6976 - Bronc Botz-Nano for middle-schoolers (2013-2016)
- Co-Founder w/Matt Blake - VEX VRC 3481z - Wonder Botz (2011) [for Physically or Mentally Challenged Teens] (2011-2012)
|