|
Re: PS3 Controller Configuration?
In Teleop, Create -> Indicator for both the Axes and Buttons from any joystick you have in there. You'll just be borrowing it temporarily for a test.
Plug in the PS3 and user the Driver Station Setup Tab to move it to the joystick USB you borrowed in Teleop.
Run the LabVIEW project in debug from Robot Main.vi.
Enable the robot from the Driver Station.
Go to the Teleop front panel and watch the Axes & Buttons indicators as you manipulate each joystick and button on the PS3.
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
|