|
Re: Bumper Brackets
If that's above 10", then you'll need to trim it down. Bumpers need to be within the bumper zone (and attachments on the bumper side are part of the bumper).
I'd also think about using somewhat heftier screws; the ones you have on there are looking like they might be a little on the non-durable side.
__________________
Past teams:
2003-2007: FRC0330 BeachBots
2008: FRC1135 Shmoebotics
2012: FRC4046 Schroedinger's Dragons
"Rockets are tricky..."--Elon Musk
 
|