|
Re: Compressor not shutting off at 115 psi
Configuring the relief valve: screw the large part at the end out or in (I forget which is the raising direction) until you get to the correct pressure (125 PSI). Make sure you keep an eye on the gauges. Once the large part is in the right place, jam the nut next to it into it.
__________________
Past teams:
2003-2007: FRC0330 BeachBots
2008: FRC1135 Shmoebotics
2012: FRC4046 Schroedinger's Dragons
"Rockets are tricky..."--Elon Musk
 
|