[P.J.]

So on YouTube I noticed some comments regarding Rule R35, which states:

Teams shall display their team number on the Bumpers in four locations at approximately 90° intervals around the perimeter of the Robot. The numerals must be at least 4 in. high, at least ¾ in. in stroke width, and be either white in color or outlined in white. Team numbers must be clearly visible from a distance of not less than 100 ft, so that judges, referees, and announcers can easily identify competing Robots.

The problem being your arm covers the numbers on the front. However, this doesn't say they all have to be visible at all times, so I think its a non issue, but I wanted to make sure to point this out. A simple fix would be to put your team number on the arm. I believe that would be sufficient to block any complaints.

And I am floored by this robot. You guys do it every year and it makes me glad to compete in Michigan so I can see what you guys do. See you at West Michigan and Troy, I'll have to come and snoop around a little bit and cry at the beauty of your robot.