Quote:
Originally Posted by DavidGitz
No joystick is required for this.
What is the IP address of your computer? The DS expects it to be a .6 address in order to use it as a local Dashboard. An easy to fix for this is to set your team number in the Driver Station or you can manually change the IP address yourself.
|
I've had success using different IP address than the 'official' address.
However, I did try setting the team number in the driver station and telling it to configure the network device. Didn't fix it.
Quote:
Originally Posted by RufflesRidge
The DS expects and sets a .5 address on the wired interface.
It sounds like communication may be going from the DS -> the cRIO but the status packets may not be coming back from the cRIO. This would likely be a firewall issue.
|
But then why did the virtual DS work correctly?
Also, the Driver Station software asks for administrative rights -- presumably this is because it needs to disable the firewall appropriately. I can try disabling the firewall however, that might fix it.