Quote:
Originally Posted by dellagd
It might be interesting to hook up a multi-meter to the wires that go to the wireless bridge and see if the voltage drops when you loose comms.
Also, just generally watch the lights on the robot and the bridge to see if anything changes from normal behavior.
|
will try this thnx.
Quote:
Originally Posted by MrBasse
Just out of curiosity, what is the battery voltage doing when you lose communication, watch the graphs in the DS and check to see if you bridge manipulator is draining all the power.
Are you sure it is the wireless losing communication? Is it possible that something isn't running right and drops the voltage so low the crio is rebooting? I guess in short, do you lose communication, robot code, or both?
|
we just lose communication.
Quote:
Originally Posted by slijin
What proof do you have that your bridge is actually dropping out?
The dedicated power output functions down to a 4.5V input, and it takes a lot to force a voltage dip big enough to bring you down that far.
|
communication with the robot is lost....