[dsherw00d]

Is the DLINK in AP or Bridge mode. It needs to be in AP mode to connect directly to it using wireless. In Bridge mode, it connects to another AP (the field AP) and bridges you across. You can also try pinging the below addresses:

.1 - Dlink
.2 - CRio
.11 - Camera
.5 - DS - yes, try to ping your self just to make sure protocols are up

If you can't ping the Dlink, nothing else will work. I believe it works tethered, which eliminates Dlink to cRIO issues.

If the wired port on the DS and Wireless are both enable, you can try disabling the Ethernet port and trying wireless again. I've seen some laptops that have issues with both active at the same time even if one is not connected.