|
Re: Ring light not bright enough in camera feed
At the Sacramento regional, there were several teams successfully using red lights.
Have you had an opportunity to set the camera's White Balance for the lighting environment you are in? If left to auto, the camera will actually adjust it's self to a point where the red light is almost white. In White Balance auto mode, the camera constantly tries to adjust it's self to present a color balanced image. If there is a large amount of one color, ie. your red targets, it will push the White Balance toward the blue end of the spectrum, thus reducing the color saturation on the red end.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|