Thread: Fabrication
View Single Post
  #27   Spotlight this post!  
Unread 30-03-2012, 20:27
MichaelBick MichaelBick is offline
Registered User
FRC #1836 (MilkenKnights)
Team Role: Alumni
 
Join Date: Oct 2011
Rookie Year: 2010
Location: Los Angeles
Posts: 734
MichaelBick has a brilliant futureMichaelBick has a brilliant futureMichaelBick has a brilliant futureMichaelBick has a brilliant futureMichaelBick has a brilliant futureMichaelBick has a brilliant futureMichaelBick has a brilliant futureMichaelBick has a brilliant futureMichaelBick has a brilliant futureMichaelBick has a brilliant futureMichaelBick has a brilliant future
Re: Fabrication

There is really no reason not to CAD. I was our single CADder for our team this year, and I was able to CAD the whole robot before we started building. Again, we had an amazing machine shop, not ridiculous turnarounds, but quicker than we could have done it in. If I had to do it again though, I would recommend CADding a full drive system before the season, preferably 6 wheel, as it is simple, yet robust and maneuverable. We took 2.5 weeks to get a drive CAD out, which was ridiculous. Part of it was that we had a hard time choosing between 6 and 8 wheel, but also, I was just inexperienced(my first year CADding). If they practice, getting a drivetrain CAD done in 2 days can be easily done, and then they will have extra time for manipulators. Furthermore, you will save time by doing this because you don't have to remachine parts.
__________________
Team 1836 - The Milken Knights
2013 LA Regional Champions with 1717 and 973
2012 LA Regional Finalists with 294 and 973
To follow Team 1836 on Facebook, go to http://www.facebook.com/MilkenKnights
To go to our website, go to http://milkenknights.com/index.html
Reply With Quote