Quote:
Originally Posted by SuperNerd256
How possible do you think it is with 4" wheels? I want to attempt this in the offseason, but our base is pretty low to the ground (about 2" of clearance)
|
It depends on how far back your wheels are; if your robot can't tilt back enough for the front to bring the bridge down, it's a no-go. The other factor is where your CG is located; if it's centered, it's going to be substantially harder to wheelie up, but if it's close to one end of your bot, it's going to be easier.
If you're actually wheelie-ing up, and not using something to prop the front up, don't forget that you have to go away from the bridge, then slam forwards to wheelie up.