[rachelholladay]

We had one camera connected at the Bayou Regional and never had comm issues. We added a second camera for CMP and connected for our practice match perfectly. We went on for match #1 and couldnt connect. (I must say as an ex-FTA assistant, hearing them say "Bypass 1912" was one of the worst feelings ever). After that match I switched out our radio (all of our radios were reprogrammed for CMP) and went to match #2. We connect for approximately ten second and then it dropped. The FTA said "I have no confidence in your radio" and we were bypassed again. I then received very generous help from some FTAs and control experts (in another thread I explain their extreme kindness) who ended up downgrading my radio firmware version from 1.4 to 1.2 and then we decided to disconnect our two radios. By the odd event of a balsa wood airplane coming on field we were able to replay match #1, but this time with our dual camera system disconnected entirely. From then on I never had issues connecting to the field and never replugged in either camera. The FTAs mentioned that dual camera had caused problems for other teams.

I dont know if the dual camera issue was the problem for anyone else. All i know is, my controls freshmen have a sworn vengeance against camera now..