[arizonafoxx]

What ever you do don't make the box more than 12". Many have mentioned the 44" constraint but we had an issue with an inspector at buckeye. He measured our drivers station and found that it was 1/8" over 12" and told use he would not pass our robot till this was corrected. His issue was that our drivers station was supposed to fit on the 12" shelf and not hang over. We tried to explain to him that once you plug in the comms cable and charge cable that these cables would make the drivers station hang over the shelf anyway. At that point he said I am just telling you what the rule in the manual states. Luckily for us the box was made out of wood so we were able to cut down one side of the box and pass inspection but the box was no longer the pretty box that was built during build season. This was the first time in my history of FRC that I had the box measured as part of the inspection of the robot. I also never saw that on the check list but maybe I missed it. We had the inspector sign the piece of wood so we could hang it on our wall of shame as a lesson learned. It also makes for a great story to tell freshmen about accurate measuring and leaving a tolerance for error.