|
Re: 2012 drivetrain
We had a wide-bot 4wd with articulating, non-powered wheels in the center. Normally, they remained off the ground, but were attached to the outer wheels in such a way that on the bump they would raise up, contacting the surface of the bump. The outer (drive) wheels would lower down to remain on the ground on bot sides of the bump.
It was powered by 4 CIMs in SuperShifter gearboxes. The outer wheels were 8in aluminum with roughtop and wedgetop tread, and the inner wheels were this years' KOP 4in traction wheels.
__________________
2010 VRC 2453B - Team Captain
2011 FRC 2637 - Electrical - Las Vegas Regional Semifinalists with 1726 and 166
2012 FRC 2637 - Electronics Captain - Las Vegas Regional Semifinalists with 1661 and 2984
2013 FRC 2637 - Build Captain - Inland Empire Quarterfinalists with 3925 and 207
2014 FRC 2637 - College Mentor - Central Valley Quarterfinalists with 2085 and 5136 / LA Regional Semifinalists with 696 and 5102
2015 FRC 2637 - Lazy Schmuck - Couch Sitting Quarterfinalist
2016 FRC 2637 - College Mentor - SD Regional Finalist with 1572 and 2443, Excellence in Engineering, Wildcard
|