Quote:
Originally Posted by sanddrag
Actually I believe they are flush cutters, most likely of the Xuron brand, but possible Xcelite.
I'd like to know what p/n of terminals you used on the Victors, and if you had to sand them to fit.
|
They're Xuron brand flush cutters.
The spade terminals that we used were sourced from McMaster-Carr, PN 69145K62. These fit perfectly in the Victor terminals. We did not need to modify these connectors.
__________________
-Kiet Chau
2004-2008 - Software Developer/Driver on Team #968
2008-2011 - Software Developer/Coach/Mentor/"Engineer" on Team #968
2011-Present - Mentor & Engineer on Team #1538
www.team1538.com