|
Re: Mounting the Fisher Price Motor
Here are three images that show how we mounted and use the FP motor and transmission to move our arm in 2011.
The interface for the output of the transmission is detailed in this post.
It uses 10 7/16" diameter holes on a 1.75" diameter hole circle.
The center shaft configuration is up to you. In 2011 we used a 1/2" axle that was threaded and cross drilled and bolted in place.
This year we built two more that used 3/8" axles that were simply cross drilled and pined in place.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|