Quote:
Originally Posted by cgmv123
- Extra nuts for the power distribution board. They're not standard and can be hard to find.
|
A MUST have for every FRC team
we bought a bag of 100 of each of the following items.
- part number 91202A234 Metric Zinc-plated Steel Split Lock Washer, M6 Screw Size, 11.8mm Od, 1.5mm Min Thick
- part number 92497A350 Metric Zinc-yellow Pltd Class 10 Stl Hex Nut, M6 Size,
- part number 94191A150 Mil Spec Grade 8 Steel Hex Nut, 1/4"-28 Thread Size, 7/16" W, 7/32" H, Ms51968-3 1mm Pitch, 10mm Width, 5mm Height
The M6 parts are for the PD, the 28TPS part is for the 120A disconnect.
Every team member is trained on the usage of the M6, 1/4-28, and 1/4-20 parts. Because the average new recruit cannot tell the difference and is gonna mess it up.
If you need those parts, visit our pit, we keep a bag of 100 stock.