In the last paragraph of page 9 of the report, it states:
Quote:
|
Over the course of these tests, FRC Engineering was able to determine how to identify a failed client authentication through the log data recorded in the field access point. However, the configuration of the field access points used during the 2012 FRC competitions, including the matches on Einstein, is such that log data is not retained when the access point is powered off.
|
Then on page 22 of the report:
Quote:
Root Cause: Failed client authentication
Mitigation: Field Hardware Logging
|
Could someone with direct knowledge please confirm/clarify: Is the "Field Hardware Logging" mentioned on page 22 specifically referring to
retention of the field access point logs mentioned on page 9?
Thank you.