Quote:
Originally posted by Antonio
does anyone have a program written up for this year's pressure switch yet?
|
Look above. All you need is:
relayX_fwd=rc_swY
relayX_rev=0
where X is the relay your pump is connected to and Y is the switch your pressure sensor is wired to.
Quote:
|
The flow controls are those elbow things on the ends of the cylinders, but it doesnt control flow, it controls exhaust.
|
It controls both. If you tighten the screws, air will not be able to enter the cylinder as quickly, thus making it extend slower. Likewise, air will not be able to exhaust out the other side so you will have pressure pushing back the other way for a longer period.