|
Re: Suggestion on What to use on battery Terminals
Quote:
Originally Posted by jwallace15
This is a quote of an earlier post, but no matter. If you'd need to check your terminals and want to use shrink wrap, I'd suggest clear shrink wrap. I don't have much experience with wiring a robot, but I know that using electrical tape is unreliable because it's not exactly the stickiest tape on the market...
I use it all the time and reccomend it to you!  |
Trust me, when the terminals aren't tight, you can tell. Just grab the wire near the terminal and wiggle it - if it's tight, it won't move. In this case, IndySam was indicating electrical tape due to the ease at which it could be removed after a terminal was identified as loose, in order to tighten the nut/bolt, and then reapplied.
__________________
2007 - Present: Mentor, 2177 The Robettes
LRI: North Star 2012-2016; Lake Superior 2013-2014; MN State Tournament 2013-2014, 2016; Galileo 2016; Iowa 2017
2015: North Star Regional Volunteer of the Year
2016: Lake Superior WFFA
|