[pr3ciousangel21]

Team 375 (From Staten Island Tech) Needs Robot Advice and Expertise ASAP

Our off-season event is this Saturday and today our robot stopped responding to all programming codes.
So we need help now please

Basically, we tested with different laptops and connections but the robot doesn't respond.

We concluded that there is nothing wrong with:
• Code
• Laptop (driver station)
• Electronics
• Crio
• Anything connected to the Crio

---- Our only possibility at the moment is the windriver installation so we are reinstalling windriver on a laptop.

Everything was working fine until today and we continuously tested on our current robot and a basic robot.....but nothing happens


What do you suggest we do now?